Includes two gaskets for the dip tubes, two for the body connects and one for the lid o-ring. Any keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber.
These kits work for Ball lock and most Pin lock kegs.

  • Worked like a charm. Everything sealed with no leaks
  • Perfect airtight seal. Great value.
  • Perfect fit, did the job. No leaks. Good quality material.
  • 5 stars: 30 (97%)
  • 4 stars: 1 (3%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
David L.
Rebuild Kit

Although I rarely need the dip tube o-rings I still buy this kit for the posts and lid o-ring. I think the white o-ring might be a softer durometer than the black Buna-N o-rings.

B
Blake U.
Buy a used corny keg! Do it!!

These are fantastic and highly recommend every time you buy a used corny. My leg smelled like root beer when I got it but after some PBW starsan new gaskets it was good as new.

D
Donald P.

Worked like a charm. Everything sealed with no leaks

k
keith v.h.
stop the CO2 leaks

If you use you tap system as much as I do you must rebuild once a year. The cost of a rebuilt kit out weights the cost of loss CO2.

L
Lewis H.

These are perfect for rebuilding my kegs

D
Douglas I.
Last Longer

The silicone ring for the corny lid last longer than others. Worth the upgrade to prevent leaks.

V
Valued C.
Can’t go wrong with fresh parts!

It’s always good to have fresh parts laying around.

C
Carlos J.
Good replacement kit

Used this to rebuild a used keg that I purchased. The O-rings were perfect

G
George G.
Good kit

Great rebuild kit. Happy I bought.

D
DC D.
Good kit. Good fit.

Seals were new and in great condition. Perfect fit did the job. No leaks. Good quality material.

D
Darrell B.
Perfect fit includes every seal except the poppets

Did the job perfectly.

J
James M.P.

The white lid ring seals better than the black harder ring used previously.

S
SP S.
Good seal

I rebuilt a used keg with this kit. The o-rings fit and the keg holds pressure.

N
Nomad C.
It's a rebuild kit

Everything seen was included and in new condition.

J
Jerry M.
MoreBeer is Superior to others (so far!)

Good website quick shipping value priced.

D
Douglas K.
Perfect fit Good Quality

Rebuilt my kegs with these kits. Perfect airtight seal. Great value.

M
Marky B.
Rebuild kit works

All the gaskets fit and worked perfectly.

B
Brohops
Affordable and packaged well

Nothing worse than losing those little o-rings. These come in a sealed bag.

p
paul s.
great to have

I clean my kegs religiously and the gasket kit has helped. I like to have a lot of extra on hand just in case I feel like I need to change a o ring out. Must have if your using corny kegs.

B
Beer S.
A must have

This is something you really want to have around when you keg a beer and find out that one of your o-rings is bad after the fact... :)

S
Scott M.
NEVER CAN HAVE TOO MANY BACKUPS!

I always make sure to have a spare set on hand just incase of leaks. ALWAYS GOOD TO HAVE AN EXTRA 1!

S
Scott M.
ALWAYS GOOD TO HAVE AN EXTRA ONE ON HAND!

I always make sure to have a spare just in case of leaks. Rings that usually go are the gas post lines. I always change those out every time I clean and transfer in a new beer. THINK AHEAD AND BUY AN EXTRA SET TO HAVE ON HAND!

c
clint e.
necessary replacement parts

Exactly the first aid kit you need for a corny kegging operation.

b
bryan t.
Fit

Worked perfectly to rebuild an old corny for cheap

S
Spectacle R.
Keep extras

These are great to have spares of. Use to replace on used kegs or just to switch out after a lot of use.

C
Clint S.
Must have item.

If you keg beer this cheap kit will/could save your tush. I keep one for each keg. Ever have an "o" ring blow out?

B
Bryan A.
gasket kits are great - takes the guess work out!

Great kit to refresh a funky craigslist corney!

S
Scott M.
Good Seal and works well

I always try to have a spair set on hand just incase of leaks and these do the trick.

R
RD
New seals save the day

Great kit to refresh a funky craigslist corney!

S
Shawn M.
Necessary and Affordable

This is every o-ring you need when rebuilding old kegs. If you buy used kegs you should be putting this kit on every time and there is no where you can find it for cheaper. Good product at a good price.

N
Nate
keep extras on hand

There's nothing worse than finding out that your keg can't hold pressure *after* you've filled it with fresh beer. I make it a point to change out the o-rings at least once a year if not twice. Keep a couple of these kits on hand and you can do it while you're waiting for hop additions.

A
Anonymous

What is the material of the o rings and lid gasket?

MoreCoffee!

These seals are made of Buna-N rubber that is perfect for all brewing applications (high heat high alcohol alkaline cleaners and acid sanitizers).

A
Anonymous

can you use these on slim torpedo kegs?

MoreCoffee!

Yes you can. The torpedo kegs have standard ball lock fittings.

MoreCoffee!

I’ve only used this for the traditional soda “corny” kegs. But the pin lock fittings should be the same style as the new torpedo kegs. I can’t guarantee that they will fit but I don’t see why the torpedo manufacturer would change the standard size opening.

MoreCoffee!

Yes

MoreCoffee!

Yes John The rebuild gaskets are good for all ball lock kegs.