Beer Faucet Shank | 2.5" | Welded 5/16" Barb | Includes Plastic Collar
60 day no hassle return policy and 1 year warranty unless noted in the product
WARNING
: This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to
www.p65warnings.ca.gov.
Comes with a welded 5/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 1-1/4" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
The barb size is rounded to 5/16" OD (0.31"). The true size is 7.5mm (0.29").
Dimensions:
- 3-1/8" - Total Length (Tip to Tip)
- 2-1/2" - Shank Length (Without Nipple)
- 1-1/8" - Thread Length
- 1-1/4" - Pass Through Length